Leonard
Published © GPL3+

Theremino Adapter for CNC

Attention: This adapter is used to replace the parallel port with the USB, and not to operate Mach3 CNC or Linux.

IntermediateFull instructions provided1 hour2,196
Theremino Adapter for CNC

Things used in this project

Hardware components

Theremino - Master V5
Theremino - Master V5
×1
Motor Drivers
Texas Instruments Motor Drivers
×1
SparkFun Motor Driver - Dual TB6612FNG (1A)
SparkFun Motor Driver - Dual TB6612FNG (1A)
×1
RobotGeek LED Driver
RobotGeek LED Driver
×1
Stepper motor driver board A4988
SparkFun Stepper motor driver board A4988
×1
Modulo Motor Driver
Modulo Motor Driver
×1
DQ542MA Stepper Motor Driver
OpenBuilds DQ542MA Stepper Motor Driver
×1
NEMA 17 Stepper Motor
OpenBuilds NEMA 17 Stepper Motor
×1
CNC xPRO V3 Controller Stepper Driver
OpenBuilds CNC xPRO V3 Controller Stepper Driver
×1
Theremino Microchip PIC 24FJ64GB002
×1
USB-A to B Cable
USB-A to B Cable
×1
Theremino Master - Unpopulated PCB.
×1
Theremino Master PCB (unpopulater).
×1

Software apps and online services

Microsoft Windows
Visual Studio 2015
Microsoft Visual Studio 2015
Theremino HAL - Hardware Abstraction Layer

Hand tools and fabrication machines

Makeblock cnc

Story

Read more

Schematics

Connector 25 pin

Pin assignment of the 25 pin parallel port connector.

Master V5 cabling

How to connect wires to Master V5 and the Paraller connector.

Code

Information about the connection.

AsciiDoc
To know more detail about the Theremino System, please visit the link in the file.
To know more detail about the Theremino System, please visit the link below: 
http://www.theremino.com/en/hardware/adapters#cnc

Credits

Leonard

Leonard

17 projects • 25 followers

Comments